Wheels/Wheel Parts

Best value in quick-release disc wheels.

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

- Rims: EVO Tour 20 - 26'' (ETRTO 559) - Inner width: 19.8 mm - Recommended tire size range: 26" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes - Rear hub (041820-02-26): Alloy, Sealed, Freewheel, Quick Release, Hollow CrMo axle M10x135mm - Rear hub (041820-03-26): Alloy, Sealed, Shimano HG compatible Freehub, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

These original replacements will get your wheels working like new. - Alloy thru-axle that can be used with a 6mm hex wrench or with a lever - Keep it light by removing the lever and instead use a 6mm hex wrench - Keep it convenient by keeping the lever inside the axle - Lever is held securely by internal O-ring - Lever sold separately

A high-value, high-performance, full-carbon disc brake road wheel packed with all of the aero and performance benefits of a 35mm carbon rim. Wheels for free speed Unlock the speed and performance of a carbon wheel upgrade with Aeolus Elite 35 TLR. This full carbon, tubeless-ready, disc brake road wheel balances durability, weight, and aerodynamics for outstanding performance that doesn't break the bank. A proven shape with a 35mm depth and the added versatility of disc brake hubs make this the perfect high-performance, high-value carbon road wheel. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of carbon care. If you damage your wheels while riding in the first two years of ownership, we'll replace them. It’s that easy. Product details - OCLV carbon offers an optimized blend of weight, strength, and durability - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 35mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) Grand Strada spokes 24/24, hex alloy nipples - Center lock disc hubs with 12mm thru-axle front and rear, Bontrager 24 point engagement, 3-pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, 12sp available separately - Includes TLR rim strip, TLR valve, and traditional rim strip - Warrantied for life, no rider weight limit

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with SSR and Select wheels - Includes 11mm Allen key adapter for installation

The ENVE 45 is a modern multi-purpose road wheel in every way. Riders with inclinations toward racing and hard solo efforts will find the rim's drag-taming and cross-wind defying shape a welcome upgrade to their rides. Those with inclinations towards the road lost and forgotten will find the rim's width and anti-pinch flat technology complementary to higher-volume tubeless road tires. All said, the ENVE 45 is everything that the dynamic modern road rider needs, and nothing that they don't. - Application: Road, Road Race, Triathlon, All-Road - Internal Rim Width: 21mm - Tire Compatibility: Tubeless 25c or larger - Wheelset Weight: 1541g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.

The design of the rim enables maximum aerodynamic penetration, and at certain angles, the wind can actually become a valuable ally to the rider. Aerodynamic hubs and ceramic USB cup-and-cone bearing system in the hubs themselves: every design choice has been made with a view to optimizing performance. - USB cup-and-cone bearing system guarantees smoothness in the ceramic bearings - The 2-Way Fit profile allows you to mount either a clincher or a tubeless tire - 19mm inner width enables you to mount 23, 25 and 28mm tires Specifications: - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 622 / road / 29" - Tire Type: Tubeless Ready Clincher

Campagnolo BORA WTO 33 Front Wheels. Each component of these wheel has been optimized in the wind tunnel in order to improve aerodynamic performance. The wheel features carbon rims with a unidirectional aerodynamic finish, new aerodynamic aluminum hubs, and the ceramic USB cup-and-cone bearing system: every design choice has been made with a view to optimizing performance. The profile of the rim, which has an internal width of 19mm, corresponds perfectly with 23 mm, 25 mm and 28 mm tires. In addition, with the 2-Way Fit version, Campagnolo offers its tried-and-tested technology with full compatibility with clincher and tubeless tires. - Hub/Brake Compatibility: Center-Lock Disc - USB cup-and-cone bearing system - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Tire Type: Clincher, Tubeless Ready Clincher

Shimano, FH-M828/788/678/648, Freehub body, Y3TH98050

From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that’s unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions. Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels. What’s being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you’re able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what’s ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels. Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer—the Roval Terra CLX II checks every box with authority. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width - ERD 577mm - Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm - Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step, from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back. - Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve) - Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

Refresh your Bontrager wheels. - Replacement axle kit for Bontrager rear hubs - Compatible with Duster Elite wheels - Includes axle and hub seal

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

The Trace rear axle fits Race Face wheels equipped with Trace hubs, like the Aeffect Wheelset. Use it as a replacement axle or to convert your wheel to a different axle standard. - Light and strong alloy construction - Compatible with Race Face Trace hub

The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,590g, Front 725g, Rear 865g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs /125kg.

Upgrade or refresh your bike. - Original equipment replacement 24" 6-bolt disc brake wheels for Trek bikes - QR hubs: 100mm OLD front and Boost 141 rear - Pinned aluminum 35mm wide rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Light, smooth, and durable Paradigm is perfect for the cyclist looking for reliable, durable performance at a great value and is packed with many of the features of our higher end wheels. Paradigm features a tubeless ready (TLR) design for easy tubeless conversion and stacked lacing which provides a better bracing angle for a stiffer wheel and more responsive ride feel. Choose Paradigm TLR road wheels for lasting durability and performance that won't break the bank. Product details - Tubeless ready (TLR) rims allow for quick transition to tubeless system upgrade - Offset spoke bed reduces wheel dish for stiff and stable performance - 6061 alloy rim 23mm outer, 19.5mm inner width, 3-pawl hub compatible with Shimano 10/11 speed, SRAM 10/11 freehubs - Includes Bontrager TLR rim strip, TLR valve stem, internal cam quick release - No rider weight restrictions

When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.