Wheels

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g

In the early design phases of our Traverse Fattie 27.5, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a super nimble, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.

SPANK Industries Fratelli Tape is a special ultra-light polyamide, adhesive tubeless conversion tape, which is ideal for SPANK's patented OohBah profile rims. Thicker, less pliable tapes are often difficult or impossible when taping complex rim profiles. Fratelli tape makes tubeless set up simple, and adapts well to a variety of rim types, including sleeved and welded joints. 25mm width tape is suggested for rims up to 29mm internal width, and 30mm tape for rims 30mm internal width and greater. With adhesive properties unaffected in a wide temperature range, Fratelli tape is also perfect for winter riders, or those in exceptionally hot environments. - Material: Ultra Thin Polyamide - Width: 25mm or 30mm - Features: high temperature range adhesive, ideal for complex rim profile Installation: - Affix tape all the way around on the right side snug against the bead hook - Then repeat a second circumference around the left side, providing double-thick coverage over the spoke holes - Use a red-hot awl or similar to pierce the valve hole

- A high performance alloy rim designed for freeride, race and downhill use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable

Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation

Salsa's Stainless Flip-Offs use stainless steel rods for corrosion-resistant strength. They're strong, lightweight, and gorgeous. - Recommended for front rigid fork or full suspension use - Beautifully machined and hand friendly - Variety of sizes, sold as pairs or individually, front or rear - Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter - More than just eye candy, they’re hand candy, as well - Weight: 49g

Salsa springs for Flip-Off skewers

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

SRAM's Quick Releases hold your wheel tightly in place, are built for ease of use and made to last, too. You get a front and rear quick release.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

EWS TESTED. The EWS is strict—break certain parts and you DNF. The rule's meant to encourage sensible management of equipment, but it's also tipped the balance in favor of toughness and reliability. Enter the Reserve 30. Its 30mm internal width supports a 2.3-2.5" tire, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out, to say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile.

30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true. - 25mm external rim width

Best value in quick-release disc wheels.

Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black

A great price on rock-solid wheels. Using the made-in-America NoBS rim from Velocity, these 36-spoke units are ready for cargo, heavyweights, and maybe even potholes… - 25.4 rim width

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - 10mm spacer kit adapts 100 x 15mm front hub to 110 x 15mm - Includes 10mm adapter to 6-bolt rotors - Includes external spline lock ring for thru-axle compatibility

- Unidirectional Toray T700 carbon fiber construction - Reinforced nipple bed with directional drilling - Titanium reinforced bead hook - Tubeless ready - Disc brake only - ISO-Road certified - Size: 700C - Model: Bolt Carbon Gravel High Profile - ISO: 622 - Width ID: 21 - Width OD: 30 - Profile: 50 - Wall: Double - Side: Disc - Drill: 28 - Valve: Presta - Weight: 460g - ERD: 545

Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.

- High-quality fat bike rim strips - Super durable PVC material

When top EWS Pro Riders ask you to develop a stiffer more durable fork axle, you listen. The stock 15mm axles and other lightweight aftermarket options were simply not tough enough for their race bikes. We don't quite ride at the pace of an EWS Pro, but we loved the simplicity and clean look of the axle so we made them available to buy. Axle F is 98% stronger and stiffer than a stock 15mm axle, yet still 20g lighter than a QR. We've replaced the QR lever with a simple 6mm hex. If you already carry the EDC multitool with you, there's no need for the heavy and bulky QR lever. FEATURES - 98% Stiffer and stronger than stock 15mm QR thru axle - 20g Lighter than stock QR thru axle - Low profile hex head won't get caught on trailside obstacles. COMPATIBILITY - For Fox and RockShox 15mm axle forks (Boost and Non Boost) - NOT compatible with RockShox RS-1 fork or Fox 36 Pinch Bolt Style (2016 and older) - NOT compatible with floating thru axles from 2021 Fox 36, 38 or 40 WEIGHT - RockShox Boost (15x110) 63g - RockShox Non Boost (15x100) 59g - Fox Boost (15x110) 61g - Fox Non Boost (15x100) 58g MATERIAL - 6061-T6 Aluminum

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains Tubeless Rim Tape, two CNC-machined black tubeless valves and two pouches of No Puncture Hassle Tubeless Sealant.

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

Designed with features and technologies that are typically reserved for premium race wheels, Aksium delivers quality performance for everyday road riding. Features include straight-pull spokes for added strength and stiffness and lightweight rims for a lively ride quality. The rims are now wider, which allows for increased air volume and a better fit for larger diameter tires (up to 32mm). The hubs are incredibly tough, delivering high mileage and long-lasting dependability. And, the QRM bearings are the smoothest in the category. It all adds up to a wheelset that delivers the high-quality ride that Mavic is known for. Smooth, efficient ride quality for everyday road riding - 17mm rim accommodates larger tire section for improved comfort. - Straight-pull spokes are stronger than J-bend options. Engineered durability so you can ride more miles without service - High quality cartridge bearings - Pinned joint and reinforced drilling rim design - Consistent and stable spoke lacing

The CNC TLR Valves are masterfully engineered tubeless bicycle tire valves constructed from lightweight, durable CNC-machined aluminum, complete with a stylish design that complements the aesthetics of any bicycle. The valve cap's machined grooves improve grip and feature an integrated valve core tool as well as a T25 tip that tightens the valve to a tubeless rim. The valves are equipped with an O-ring and grooved aluminum locknut for a leak-free seal. They're tubeless sealant friendly, designed for maximum airflow, and offer compatibility with all Presta-style floor pumps and hand pumps. SPECS: WEIGHT: - 44mm: 6.4g - 60mm: 14.0g - 80mm: 16.0g

Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width

Confident and capable of cleaning the A-line yet budget-friendly to save up for a season of bucket-list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 points with 4° engagement, by way of a six pawl driver and 45-tooth drivering. - High-load sealed cartridge bearings - Classic j-bend spokes - Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload - CNC machined, anodized, and assembled entirely in Asheville, NC - Service-friendly retained pawls actuated by durable leaf-springs - Unified service parts across the range

Confident and capable of cleaning the A-line yet budget-friendly to save up for a season of bucket-list rides, the 101 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4-degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. - S is for steel, in this case, the spokes—high performance 28h hub and conventional J-bend spokes - 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset

- Made start to finish in Asheville, NC - Light weight and easy to service

- Made start to finish in Asheville, NC - Light weight and easy to service

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Standard American Schrader Valve - CNC Machined from 6061 T6 aluminum - Knurled body for added grip - Sold as a pair - Upgrade your plastic caps with some style - Compatible with all Schrader valve tubes, including cars, motorcycles, wheelbarrows, tractors, and more - Weight: So light they will not register on our scale

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

Champion 2.0 Black Spokes - One 264mm spoke = 7g

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - DT Swiss Rear End Caps - QR x 135/142mm

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Replacement axles for DT Swiss hubs.