Wheels

- Rims: EVO Tour 20 - 26'' (ETRTO 559) - Inner width: 19.8 mm - Recommended tire size range: 26" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes - Rear hub (041820-02-26): Alloy, Sealed, Freewheel, Quick Release, Hollow CrMo axle M10x135mm - Rear hub (041820-03-26): Alloy, Sealed, Shimano HG compatible Freehub, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Upgrade or refresh your bike. - Original equipment replacement 24" 6-bolt disc brake wheels for Trek bikes - QR hubs: 100mm OLD front and Boost 141 rear - Pinned aluminum 35mm wide rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your bike. - Original equipment replacement 24" 6-bolt disc brake wheels for Trek bikes - QR hubs: 100mm OLD front and Boost 141 rear - Pinned aluminum 35mm wide rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your bike. - Original replacement wheel - Does not include skewer, reflector, rim strip, valve, or owner's manual

Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires

The new Flow MK3 is wider, stronger, and lighter. Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width, offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing thanks to increased lateral stiffness and durability. The new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Built on the proven success of our Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail and All-mountain tires

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components

This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

- A high performance alloy rim designed for freeride, race and downhill use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable

Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

SRAM's Quick Releases hold your wheel tightly in place, are built for ease of use and made to last, too. You get a front and rear quick release.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true. - 25mm external rim width

Best value in quick-release disc wheels.

Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black

A great price on rock-solid wheels. Using the made-in-America NoBS rim from Velocity, these 36-spoke units are ready for cargo, heavyweights, and maybe even potholes… - 25.4 rim width

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Designed with features and technologies that are typically reserved for premium race wheels, Aksium delivers quality performance for everyday road riding. Features include straight-pull spokes for added strength and stiffness and lightweight rims for a lively ride quality. The rims are now wider, which allows for increased air volume and a better fit for larger diameter tires (up to 32mm). The hubs are incredibly tough, delivering high mileage and long-lasting dependability. And, the QRM bearings are the smoothest in the category. It all adds up to a wheelset that delivers the high-quality ride that Mavic is known for. Smooth, efficient ride quality for everyday road riding - 17mm rim accommodates larger tire section for improved comfort. - Straight-pull spokes are stronger than J-bend options. Engineered durability so you can ride more miles without service - High quality cartridge bearings - Pinned joint and reinforced drilling rim design - Consistent and stable spoke lacing

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

Champion 2.0 Black Spokes - One 264mm spoke = 7g

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

- Double butted 2.0/1.5/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 143g @ 32/265mm - Box of 72 - Nipples sold separately