Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Bottom Brackets
$459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
Compatible with:
- Frame: Italian BB
- Opening diameter: Threaded
- Shell width: 70mm
In the box:
- 2 cups with CeramicSpeed Bearings installed
- 2 dust covers
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
- Spacer tube
$23.99 - $24.99
Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles.
- Fits JIS Square-Taper Cranksets
- Hollow spindle
- Crankarm fixing bolts not included
$46.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.
- One oversized spindle to work across every bottom bracket standard.
- Significantly lighter than PFGXP system
- Easier installation by allowing you to press the bearing cups into the frame
$41.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
$263.00
- Ceramic bottom bracket for DUB spindle cranks
Specs:
- BB Shell Type: BB92
- BB Shell Width: 89/92mm
- BB Bearing: Ceramic
- Crank Spindle Diameter: 28.99mm
- Interface: DUB
- Cup Diameter: 41mm
$14.99
The Shimano BB-UN53 and BB-UN52 Bottom Brackets feature a sealed cartridge design for longer life and less maintenance.
$26.99
Black Label's Mid BB Set includes bearings, washers, a center spacer, and cones. It's for use with 19mm crank axles.
$77.95
- Bottom brackets for e*thirteen XCX, TRS, and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit)
- 7075-T6 black anodized cups with custom angular contact bearings
- One year no questions ask
- Model: EXA+
- Interface: P3 Connect
- Shell: English
- For installation of BSA bottom brackets, use e*thirteen BB tool (included with cranksets) or a 1-3/4" 12 point socket
$12.99 - $59.99
Race Face bottom bracket adapter kits for X-Type cranksets.
$36.99 - $43.99
Pressfit Model:
• For use on BB86/92 bottom bracket shells
• Compatible with 24mm spindle Hollowtech II cranksets
• BB Shell Width (mm): 92 mm
• BB/Frame Interface: BB86 , BB92
• Bottom Bracket Shell I.D.: 41
• Defined Color: Black
• Spindle Interface Type: Shimano Hollowtech II
Threaded Model:
• Includes 3 x 2.5mm spacers
• Includes TL-FC24 adapter tool
• Reduced size for light weight
• New seal construction for smoother rotation
• Requires TL-FC34 or included TL-FC24 adaptor for installation & removal
• BB Shell Width (mm): 68 mm
• BB/Frame Interface: English
• Defined Color: Black
• Spindle Interface Type: Shimano Hollowtech II
• Weight: 77 g
$19.99 - $24.99
- Steel body
- Steel cups
- Chromoly spindle
- Sealed bearings
- Interface: English
- Square Taper JIS
- Weight: 305-320 grams
$20.99
Shimano BB-ES300 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included
$9.99 - $13.99
- One-piece bottom bracket cup set
- Bearings included
- Shell: 68mm
- Spindle Type: OPC
- Cup Material: Steel
- Weight: 265 grams
$19.99
High performing square bottom bracket interfaces with English frames.
- Fits square-taper spindle cranksets
- Alloy adjustable cups
- Includes 2 axle bolts
$54.99
Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket.
- 2 lines of bearings on each side
$44.99
SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
$59.99 - $74.99
- Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family
- Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits
$29.99
- Steel body
- Chromoly spindle
- Sealed bearings
- Repair BB designed to work in frames that have stripped BB threads
- Shell: 68mm
- Spindle Type: Square Taper JIS
- Weight: 360-370 grams
$178.00
Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool.
- King made-in-house bearings
- 5-year warranty
- Included Fit Kit #4 is designed to mate the ThreadFit 24 bottom bracket with a 24mm spindle
- Spindle Interface Type: Shimano Hollowtech II
- BB Shell Width (mm): 68 , 73
- Bottom Bracket Shell I.D.: 1.37
- BB/Frame Interface: English
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
The BB30 for SRAM DUB Road comes in two versions; one using our CeramicSpeed Standard Bearings and the other using our Coated Bearings for even longer lifetime and lower friction.
Compatible with:
- Frame: BB30
- Opening diameter: 42mm
- Shell width: 68mm
- Bottom Bracket Tool for installation: BBT-79
In the box:
- 2 cups with CeramicSpeed Bearings installed
- 2 dust covers
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker Sheet
$459.00
These bottom brackets are equipped with hand-built coated bearings specially developed for off-road performance that offer extreme durability and feature a unique design for SRAM DUB 28.99mm cranks.
Coated bearings utilize the highest-quality CeramicSpeed ceramic balls, running on hardened-steel races with a 3-micron-thick metallic coating that makes the races corrosion-resistant, harder, and smoother, increasing service life and reducing friction.
- This product has a unique design specifically for SRAM DUB 28.99mm cranks
- Native fit frame interface and no plastic adapters or excess spacers
- This design features a custom integrated dust cover for maximum durability
In the box:
- 2 CeramicSpeed Bearings
- 2 dust covers
- Plast sheet
- 1 x 3mm spacer
- 2 x 1mm spacers
- 10ml syringe of CeramicSpeed Long Life Grease
- Sticker sheet
$41.00 - $58.99
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks
- BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks
- BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks
- BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks
- BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks
- BB-4000 is for 19mm spindle 69mm shell Omega cranks
- BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
$459.00
The PF4130 bottom bracket is Press Fit into 41mm diameter shells that are 86.5mm wide and mate most cranks with a 30mm spindle to that standard. If you have a BB86 frame and want to install a 386EVO crank or Rotor 30mm crank, this is the kit you need.
CeramicSpeed bearings are installed in cups. The Standard Bearing has ceramic CeramicSpeed balls and hardened-steel races. The Coated Bearing has the same balls running on hardened-steel races with a 3-micron-thick metallic coating making the races harder and smoother, increasing service life and reducing friction.
Enjoying the benefit of a massive, strong, and light 30mm crank spindle in your BB86 frame is possible with this kit. Press in the cups, set up the wave washer, add spacers if necessary, and torque down.
CeramicSpeed's bottom bracket is also stiff and light, but its greatest benefits come in the form of drag reduction. Standard Bearings with stock grease typically have frictional drag of 0.3-0.4 watts per set. That's about a 75% drag reduction compared to conventional bottom brackets. The bearings also last at least three times longer than other bearings.
Performance can be tuned by replacing grease. All Round comes with this BB, but you can change it to TT and Track Grease for less drag or to LongLife for greater durability.
In The Box
- 2 cups with bearings installed
- 2 1mm spacers
- 2 0.5mm spacers
- 2 dust covers
- O-ring
- Plastic cable protector
- 10ml syringe All Round Grease
- Sticker sheet
$459.00
BSA comes from Birmingham Small Arms, aka English threading. English threading on mountain bikes means a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor or RaceFace, to fit in the tight space of this 30mm spindle.
CeramicSpeed Coated Bearings are hand-built with unique CeramicSpeed Ceramic Balls installed on coated, hardened-steel races for longer life and less bearing drag compared to standard bearings.
In The Box
- 2 threaded cups with bearings installed
- 2 1mm spacers
- 2 0.5mm spacers
- 2 dust covers
- O-ring
- 10ml syringe All Round Grease
- Sticker sheet
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
Compatible with:
- Frame: PF30
- Opening diameter: 46mm
- Shell width: 68mm
In the box:
- 2 cups with CeramicSpeed Bearings installed
- 2 dust covers
- Spacer-tube
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
$74.99 - $89.99
As The Wheel Turns
This trusty 30mm workhorse of a bottom bracket is built with custom RF double row cartridge bearings for trouble-free, long haul rolling for you PF41 frame.
In A Sea Of Bearings
These little buggers can make a huge difference, so we've made sure our double row custom retainer bearings are super durable and up for the long run.
Close Enough Won't Cut It
These precision steel cup are coated for corrosion resistance, and CNC-ground surfaces of this bottom bracket provide an exact, perfectly quiet fit in your frame.
Weather, Or Not
All RF bottom brackets come with an inner plastic sleeve to keep the elements out and include all appropriate spacers to ensure a versatile fit.
$144.53
BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 146g
$19.99
FSA PowerPro JIS Cartridge Bottom Brackets.
- Includes bolts
- Spindle Interface Type: Square Taper JIS
- BB Shell Width (mm): 68
- BB/Frame Interface: English
Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets
Page 1 of 4
Next page