Parts & Accessories
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Keeps Swagman hitch racks secure and stable - Unique hidden pin cylinder for added security - Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks - Threaded
- High security key allows for easy access with only a half-turn to unlock - Premium chrome plating for maximum rust protection - 7.5 ft. long 10mm security cable with hitch pin adapter
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Unique hidden pin cylinder for added security - Fits 2" only equipped racks - Threaded
- High security key allows for easy access with only a half-turn to unlock - Premium chrome plated for maximum rust protection - 8.5 ft. long 10mm security cable with hitch pin adapter
The Swagman eBike/Cruiser Bar Adapter creates a higher top tube for your bike by attaching below the stem and seat post of your bikes. This will allow the ratcheting arms of your bike to hold step-through and heavier-weight bikes securely by grabbing onto the adapter. - Fits: Cruiser, eBikes and Step Through bikes requiring a higher top tube for use on Platform Hitch Mount Racks. - Max Load: 35 lbs. per bike when used on a Hanging Rack - Telescopic bar fits multiple bike sizes - Adapter comes equipped with vinyl-coated hangers - User friendly quick release - 25"-31" Maximum Width
Whether it’s a city bike with a step-through frame or full-suspension mountain bike, some bikes just may not work well with a car rack that suspends the bike from its top-tube. Swagman's Deluxe Bar Adapter changes that. This telescopic bar hooks under the stem and around the seatpost to create a "top tube" that the rack can hold. It features vinyl-coated, quick release hooks so it's gentle on your bike and easy to use. The 19-inch Deluxe Bar expands up to 26-inches in length.
Adapt your Swagman G10 platform hitch rack (sold separately) to accommodate fat bikes with wheel trays that fit wide tires. - G10 Fat Bike Wheel Holder (set includes 2 wheel trays)
Adapt your Swagman bike rack to accommodate fat bikes with wheel trays specifically made for extra-wide tires. - Fat Bike Wheel Holder (set includes 1 inner, 1 outer wheel tray) - For use with Swagman's Quad 2+2 or Chinook bike racks
The Swagman Horizontal RV Bike Bag - Large is new and improved with larger volume to allow for wider handle bars and a greater variety of hitch-mounted tray-style racks including our Escapee. Constructed of super-tough, water-resistant 420 D Nylon. Covers up to 2 bikes on any RV hitch-mounted rack. Not for use on regular vehicles, only RV, 5th Wheels & Travel Trailers. - Constructed of super tough, water-resistant 420 D Nylon - Covers up to 2 bikes - Not to be used on the back of a vehicle. The main issue is wind, putting the RV bag on the back of a regular vehicle (non-RV) subjects it to an excessive force from the wind, which will likely tear/shred the bag, but also puts an undue load on the bike rack and the bikes which can lead to the rack failing or damage to the bikes. - Ensure that bike and covers are clear of exhaust pipes and that the cover can't get caught in any moving parts on the vehicle.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
$24.99 - $25.00
The lock comes with a burlap bag, dust cap, two keys, and a Kuat keychain bottle opener. 3/8" pin is for our 1.25" racks and the 1/2" pin is for our 2" racks.
The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
$398.00 - $399.99
Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
Throw your tailgate cover on, cinch it down, load up the bikes and go. There is no easier way to head to the top. With 5 straps, the Small Camo Tailgate Cover can help shuttle your whole crew while protecting your bikes and pickup from dings and scratches. - Fits most mid-size/compact trucks - Premium padded tailgate protection - Flap for easy access to tailgate handle - Five webbing straps for attachment - Dimensions: 33.5L x 54W x 16H in / 85.1L x 137.2W x 40.6H cm
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
Page 1 of 1