Tires/Tubes

The Verdict family presents our most aggressive front-focused tires for days where relentless traction takes priority over rolling efficiency. Tall, chunky knobs dig deep into soft terrain regardless of how loose or sloppy it may be. Abundant open space between all knobs gives them room to dig through the driest days of summer and fling mud in the wettest months. The Verdict family is guilty of holding it down through off-camber corners and chundery descents. Verdict is the do-it-all spike designed to handle loose, technical trails. Its toothy knobs dig into soft terrain and grapple through rocks and roots. Dry and dusty during the loose summer months in California, Colorado or Italy? Go with the Verdict. PAIR IT WITH A JUDGE The Judge 2.4 rear tire compliments their usage with equally robust knobs that emphasis claw-like braking traction while also keeping rolling efficiency in mind. Looking to keep the front upright while you steer with the rear? That’s what you get with the Verdict/Judge combo. TRITEC AND SLASH GUARD: Verdict and Verdict Wet feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of supportive rubber, which transitions halfway into the height of the knobs and allows for the use of softer knob compounds without folding under cornering forces. The tops of the center knobs consist of an intermediate compound to provide traction and durability without sacrificing rolling efficiency. Outer knobs feature a soft compound that delivers maximum grip and slow rebound. All TCS Light versions of the new Verdict tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply casing. Verdict Wet is only available with a TCS Tough casing, and therefore, isn’t available with Slash Guard. FEATURES: - The Verdict tread pattern excels in loosest, rowdiest conditions where relentless traction takes priority over rolling efficiency. - Abundant open space between all knobs allows the tread pattern to dig through the driest days of summer and fling mud in the wettest months. - Pair it with the Judge 2.4 as a rear tire for claw-like braking traction that matches the tenacious grip of the Verdict tread. - Optimized for use with i29 rims.

The Verdict family presents our most aggressive front-focused tires for days where relentless traction takes priority over rolling efficiency. Tall, chunky knobs dig deep into soft terrain regardless of how loose or sloppy it may be. Abundant open space between all knobs gives them room to dig through the driest days of summer and fling mud in the wettest months. The Verdict family is guilty of holding it down through off-camber corners and chundery descents. Verdict is the do-it-all spike designed to handle loose, technical trails. Its toothy knobs dig into soft terrain and grapple through rocks and roots. Dry and dusty during the loose summer months in California, Colorado or Italy? Go with the Verdict. PAIR IT WITH A JUDGE The Judge 2.4 rear tire compliments their usage with equally robust knobs that emphasis claw-like braking traction while also keeping rolling efficiency in mind. Looking to keep the front upright while you steer with the rear? That’s what you get with the Verdict/Judge combo. TRITEC AND SLASH GUARD: Verdict and Verdict Wet feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of supportive rubber, which transitions halfway into the height of the knobs and allows for the use of softer knob compounds without folding under cornering forces. The tops of the center knobs consist of an intermediate compound to provide traction and durability without sacrificing rolling efficiency. Outer knobs feature a soft compound that delivers maximum grip and slow rebound. All TCS Light versions of the new Verdict tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply casing. Verdict Wet is only available with a TCS Tough casing, and therefore, isn’t available with Slash Guard. FEATURES: - The Verdict tread pattern excels in loosest, rowdiest conditions where relentless traction takes priority over rolling efficiency. - Abundant open space between all knobs allows the tread pattern to dig through the driest days of summer and fling mud in the wettest months. - Pair it with the Judge 2.4 as a rear tire for claw-like braking traction that matches the tenacious grip of the Verdict tread. - Optimized for use with i29 rims.

Wrathlorde is an extreme-conditions fat bike tire designed for ultimate traction on challenging surfaces. Aggressive, tightly-spaced lugs decrease rolling resistance without compromising on traction, while 300 XL concave studs bite into ice for complete confidence. - 120 TPI tubeless-ready casing - Aggressive, tightly spaced center lugs with siping for a blend of rolling speed and traction - Tall side lugs for traction in corners - 300 XL Concave Studs for ultimate traction on ice - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. - XL Concave Studs - Deep lugs provide accelerating, braking, and cornering traction - Open tread pattern sheds snow - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Our Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a five-gallon container that's ideal for in-home or shop use. - Non-toxic, non-separating formula doesn't have a limited shelf life like the competition. - Coats the tube for permanent protection. - Works with any bicycle tube with a removable valve core. - Works continuously to prevent slow leaks. - Completely homogenous, so it doesn't puddle.

Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice. Details: - Fast-rolling center tread for carrying speed - Large, braced side lugs for predictable cornering performance - Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern - 60 TPI and 120 TPI casing options - Tubeless-ready for supple ride quality, more grip, and weight savings - We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- Ammonium/latex/protein free sealant

Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions. - Siping creates a more conforming lug for added traction - Concave carbide studs provide traction in the iciest conditions - Reflective strip on sidewall makes you more visible when riding in low-light conditions - Fits most bikes with cantilever or disc brakes

Our most dirt-focused Road Plus tire yet, the Byway Road Plus TCS tire delivers supple plus-size traction and smooth riding characteristics farther into the dirt. The Byway Road Plus tire allows riders to find comfort on remote gravel roads without feeling slow on the pavement required to reach them. - Smooth centerline for efficiency with diamond-shaped outer knobs for grip in the dirt - High volume tire enables comfortable ride - Dual Compound rubber means a fast-rolling tire with great corning traction - Designed to meet ETRTO standards, TCS (Tubeless Compatible System) tires feature the best of both worlds: they boast the ride benefits & reliability of a tubeless tire with the minimal weight of a tube-type tire

The Horizon Road Plus tire brings supple plus-size traction and smooth riding characteristics beyond where the pavement ends. A smooth centerline and all-weather herringbone pattern with cornering channels make anything possible, just like the size. High-volume road provides deceivingly svelte performance on pavement, with resiliency that isn’t shaken by chasing confidants down dusty dirt roads. Sneak it into a cross bike, fit it into a road frame, the overall wheel diameter stays the same as a 700 x 30mm road tire. Ride it on tarmac, take it to the dirt as well. Creating a new riding experience, regardless of where your exploits lead you.

Resolute 42 is the ultimate all-weather gravel tire for those who believe there is a perfect tread pattern for every ride. Small, square knobs deliver consistent bite into a variety of terrain, while the ample spaces between them prevent packing up when conditions become fun (a.k.a wet). Truly all-season in nature, its 42mm width makes it a set-it-and-forget-it gravel tire for endlessly undulating roads through all varieties of weather. Usage: Gravel / Monstercross Conditions: Dry to Wet / Hardpack to Loose Gravel - 650B: 440g - 700c: 460g

Born out of a need for unwavering traction in every corner of the world, the Vigilante is WTB's premier aggressive trail and enduro tire. The square-lugged, open-tread pattern offers stability through wet or dry, while the prominent outer knobs grip at lean angles like nobody’s business. Ample spacing ensures it flings mud, while also allowing the knobs to bite into loose, chunky terrain. Usage: All Mountain / Enduro Conditions: Wet to Dry / Loose, Rocky, Mud - TCS Light/Fast Rolling: 900g, Dual DNA compound - TCS Light/High Grip: 900g, Gravity DNA compound - TCS Tough/Fast Rolling: 1056g, Dual DNA compound - TCS Tough/High Grip: 1140g, Gravity DNA compound - Comp Tube-Type: 1040g, DNA compound

- Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

- THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3" 80-100ml - MTN: 2.4-3.0" 100-125ml

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Meet Edna: Surly's latest ultra-versatile fat bike tire. Edna was designed to perform admirably on a wide variety of terrains. Wanna go ride some super loose dirt or snow trails? Do it. Feel like riding over the pulverized bones of your enemies or, as some people call it, sand? Go for it. Hardpack? Lean back and let ‘er rip. Edna’s unique tread pattern has enough lug to provide bite on the loose stuff and a tight center tread that doesn’t drag on the hard. Add in a 4.3” footprint and you have enough traction and float to ride wherever and whenever you damn well please. - Folding bead - Casing: 60 TPI - Max pressure: 30psi - Weight: 1330g

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Let Dunderbeist loose on your local groomed single track and feel the aggressive tread claw through the snow with unrivaled propulsion and braking traction. Its 4.6-inch footprint provides enhanced flotation and is compatible with a wide range of frames. Dual compound rubber rolls fast and keeps you in control while shredding the berms. Point uphill and feel the Dunderbeist dig in as you attack climbs covered in loose, unconsolidated snow. Pair Dunderbeist with its sibling front tire, Flowbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a rear tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Flowbeist front tire

Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a front tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Dunderbeist rear tire

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - Large stud offers more bite than regular concave stud and less rolling resistance than XL stud - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.