Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shoes

$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156
$449.99 - $450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$424.99
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$424.99
When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$399.00
KEY PERFORMANCE FACTORS SUPERIOR POWER TRANSFER An all-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber for superior toe-heel stiffness. The unique design significantly boosts power transfer while allowing enough torsional flex for natural foot movement. This helps minimize lower leg strain during the pedal stroke with zero watts wasted. PERSONALIZED FIT Most cycling shoe enclosures press the foot down toward the sole. The Surge Pro’s redesigned ExoWrap system draws the foot up into the shoe, using its unique wrap-around design and new micro-adjust Li2 Boa® reels. The result is a 360-degree foot closure that gives you an ultra-comfortable and personalized fit. COOL COMFORT A new polyurethane coated mesh upper with laser cut micro-perforations delivers maximum ventilation combined with long-lasting durability. The seams are welded rather than sewn, which helps minimize weight and gives these road shoes a sleek profile with a supple feel. - All-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber lay-up construction for superior toe-heel stiffness - An all-new 360º wrap-around upper with high frequency welded seams and laser cut micro-perforations for optimal ventilation and a balanced foot climate - All-new internal ExoWrap structure for an ultra-comfortable, 360-degree foot enclosure and a customizable fit - All-new exclusive performance last offers all-day comfort and increased fit options - All new micro-adjust Li2 Boa reels give a super secure and comfortable fit, Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate
$399.00
The new Macha Pro helps you get the most out of every pedal stroke whether you’re out on a training ride or in a mid-race sprint. Anchored by the power of technology, the Macha Pro puts the Motion Efficiency System to work for you. These performance-level racing shoes are lightweight and efficient, and the stylish design comes in two colorways. FEATURES - 100% long-fiber carbon ExoBeam plate with all-new dual beam design, offers secure mid-foot contact for better power transmission - ExoBeam technology reduces strain on the knee and ankle joints - All-new 360º ultra-lightweight, wrap-around upper with high frequency welded seams offers optimal support - All-new internal, direct pull ExoWrap structure design with all-new dedicated Boa Li2 dial produces a 360° foot enclosure for customizable arch fit and support - Laser cut micro-perforations in the upper for improved ventilation, cycling-specific performance last enhances overall performance - SharkSkin heel lining, removable sockliner with tunable arch support and TransTextura Plus layer
$350.00
The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).
$299.99 - $349.99 $299.99 - $349.99 Up to 8% Off
Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.
$299.99 - $349.99 $299.99 - $349.99 Up to 14% Off
Upper: Microfibre microtech Sole: Carbon composite 20 sole Technology: - Soft instep 4 - Tecno 3 system - Sidi heel cup - Replaceable heel pad
$299.99 - $324.99 $324.99 Up to 8% Off
Ride further, whatever the terrain, whatever the bike, whatever the destination. The Sidi Eagle 10 is the best shoe for any day on the dirt, whatever your riding style. The Microtech upper, the first microfiber introduced in cycling shoes years ago by Sidi, is the most comfortable Sidi has ever offered, while the sole is designed to ensure the ideal combination of performance and comfort both on and off the bike. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep, ensuring an ideal fit -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The all new proprietary SIDI Wire monofilament is completely non-binding for intuitive and effortless on-the-fly adjustments -The integrated heel cup, with a new light weight design is reinforced to avoid deformation during the most grueling of rides -The reflective inserts on the heel improve safety on the road, helping to signal the presence of the cyclist in conditions of poor visibility -The shape of the tread has been specifically designed for mountain biking, allowing improved grip, superior mud dispersion and great stability -The toe inserts are easily replaceable and offer the ability to mount crampons for particularly muddy rides -The Sidi MTB SR17 sole represents an ideal balance of stiffness for efficient power transfer and flexibility and comfort for walking
$179.99 - $259.99 $239.99 - $259.99 Up to 25% Off
- Upper: Politex suede effect, mesh, upper drilled on the inside. The "Politex” material is constructed of several overlapping layers with different physical mechanical properties. The compacted PVC is then coupled to two fabrics (knitted fabric + felt) that is then film dyed for long-lasting color retention. "Politex” offers strong resistance to ripping, laceration, stretching and fading. "Politex” is made in strict compliance with European regulations and is a totally "green” product. - Has been specifically studied for this specialty, may be fitted with two toe spikes on the front for traction in difficult and muddy conditions. The toe spikes are sold separately. - Polyurethane shock absorber on the external area with inner padding. - Abrasion-resistant material on the toe. - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. - Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on the-fly adjustments. - Like most Sidi small parts, the Techno-3 System is serviceable and replaceable.
$250.00
Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)
$249.95
The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes
$179.99 - $239.99 $239.99 Up to 25% Off
- Upper: Politex suede effect, mesh, upper drilled on the inside. The "Politex” material is constructed of several overlapping layers with different physical mechanical properties. The compacted PVC is then coupled to two fabrics (knitted fabric + felt) that is then film dyed for long-lasting color retention. "Politex” offers strong resistance to ripping, laceration, stretching and fading. "Politex” is made in strict compliance with European regulations and is a totally "green” product. - Has been specifically studied for this specialty, may be fitted with two toe spikes on the front for traction in difficult and muddy conditions. The toe spikes are sold separately. - Polyurethane shock absorber on the external area with inner padding. - Abrasion-resistant material on the toe. - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. - Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on the-fly adjustments. - Like most Sidi small parts, the Techno-3 System is serviceable and replaceable.
$224.99 - $230.00 $224.99 - $230.00 Up to 2% Off
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)
$225.00
Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding
$224.99 $299.99 25% Off
Sidi's Dominator line has long been one of the more popular MTB kicks you'll find on the mountain, particularly in disciplines that ask for unwavering stiffness and power, and this year the brand is back to please again with its tenth iteration in the Dominator 10 Cycling Shoe. While the last has remained the same to keep fit true, the Dominator 10 features a host of new technology, including a dual Tecno 3 Boa system for minute adjustments to fit, and all-new Soft Instep 4 closure that reduces pressure to the instep, preventing foot-numbing pressure while you ride. But thankfully not everything has changed — Sidi stays true to its roots with Microtech Microfibra uppers that are both supple and supportive, without packing in extra weight. These incredibly fine fibers act like a natural leather skin, but have advantages of increased strength, soft texture, and light weight. Being water-repellent, quick-drying, breathable, and permeable to water vapor, it's an ideal material for shoe uppers, and easier to clean than leather. Additionally, this material is resistant to stretching and deterioration from atmospheric agents. And to keep your feet from getting too warm, mesh inserts were added throughout the uppers. To cap it all off, the manufacturing process is environmentally friendly, using only water-based products instead of solvents. Sidi also continues using its MTB RS17 sole, which they report is lighter and better performing, constructed of a stiff nylon composite that efficiently puts power to the pedals. The tread inserts provide grip on a variety of surfaces and also facilitate mud dispersion. If you need some extra traction in particularly sloppy conditions, the sole is compatible with toe spikes. For those times when you miss a clip-in, the central insert works as a traction pad to help prevent slipping a pedal. Perhaps the most exciting update to the sole is that the toe insert is now replaceable via screws. Considering this area is subjected to more wear, especially when walking, this is a simple and inexpensive way to prolong the life of these already durable shoes. Sidi's coveted MTB kicks get a makeover in their newest iteration Microtech microfiber uppers are light, durable, and water-resistant New Soft Instep 4 closure system reduces foot-numbing pressure Two Tecno 3 dials enable micro-adjustments for dialing a flawless fit Secure your foot in place with help from reinforced heel cup Don't waste your efforts on flex with MTB RS17 nylon composite sole Aggressive lugs improve grip for off-bike efforts
$200.00
The original Impact is the most popular and versatile shoe in downhill mountain biking history. With a Stealth S1 rubber outsole, the Impact is burly and durable without sacrificing stickiness or pedal contact. A slingshot heel for a secure fit, compression-molded PU midsole for extra support, and a stitched and reinforced toe cap for protection from the hazards of the trail make the Impact one of the most comfortable and protective shoes available. Its leather upper contains a mesh tongue and side panels for increased breathability making it an ideal shoe for any environment. - Outsole Material: Rubber - Midsole Material: Compression-Molded PU - Upper Material: Leather
$179.99 - $180.00
GRAVEL SHOES WITH OPTIMALLY BALANCED STIFFNESS AND WALKABILITY. FEATURES: - Carbon-reinforced sole provides race-level rigidity for enduring pedaling performance on day-long rides. - Wide outsole pattern with TPU lugs for optimal on- and off-the-bike comfort and performance. - Lightweight gravel-race-inspired outsole. - Surround wrapping upper pattern balances holding power and comfort. - BOA L6K dial allows quick and precise micro-adjustment. - System engineered with SPD pedals for maximum pedaling efficiency and stability.
$179.99 - $180.00
$180.00
If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)
$159.99 - $170.00 $159.99 - $170.00 Up to 6% Off
The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)
$126.99 - $169.99 $159.99 - $170.00 Up to 21% Off
Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)
$169.99 $229.99 On Sale
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon—power transfer, comfort, light weight, style—in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pavé-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you’re flying up a run-up on the ‘cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we’ve given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)
$161.95 - $169.99 $225.00 - $229.99 Up to 28% Off
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)
$161.99 $324.99 50% Off
On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.
$160.00
Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)
$99.99 - $159.99 $159.99 Up to 38% Off
Progressive Performance Clipless Trail Shoe - Highly durable upper fabrics with perforated panels for enhanced ventilation - Low absorbency quick-dry lining - EGM footbed maximizes comfort and power transfer - StickyFoot Grip pedal contact areas provide great connection with caged and clipless pedals - Toe and heel sections deploy StickyFoot Dura in an aggressive tread pattern to provide superb walking grip and durability. - Offset cleat box with increased longitudinal adjustment provides a wide range of stance option for caged or traditional clipless pedals - Flex profile balances stiffness and flex for power transfer and control - Traditional laces and additional Velcro strap lock your feet in place - Sharkskin fabric lined heel cup helps hold foot in place - Reinforced toe and heel box offer protection from flying trail debris
$99.99 - $159.99
AS THE BURLIEST SHOE IN THE RIDE CONCEPTS LINE, TNT MEETS THE TOUGHEST DEMANDS OF HARD RIDING AND TRAIL BUILDING TNT is our bomb-proof, asymmetrical mid-top flat developed with a focus on gravity riding and trail building. Using a microfiber upper for durability and performance in all conditions, D3O impact protection is placed in the medial collar to ward off unexpected crank-side encounters while a robust, custom-molded toe cap and heel run defense fore to aft. The MAX GRIP rubber outsole features a recessed area on the toe and heel for traction while hiking and digging. The hook and loop Powerstrap tops it off for a final sense of security, whether conquering a technical descent or building a new send is on the day's agenda. Features: - MAX GRIP rubber outsole - Recessed toe and heel outsole for traction while hiking and digging - Medial high-rise EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Microfiber synthetic upper is abrasion and weather resistant - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - 40mm hook and loop strap for additional foot retention - Elastic lace tuck to keep laces secure - Custom-molded rubber toe cap and TPU heel protection - Asymmetrical medial collar with D3O impact protection
$159.99 $159.99 - $160.00 On Sale
The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Multiple widths available. - Approximate weight: 365g (1/2 pair, Size 42)
$159.99
Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with a L6 Boa® for precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram™ rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)
$159.95 $325.00 51% Off
The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)
$150.00
Equipped with durable Stealth S1 rubber on the high-friction Dotty outsole, the Freerider Canvas is a shoe that can handle all the rigors of the bike park and the backcountry. The durable canvas upper makes this shoe more breathable and lighter than the original Freerider. - Outsole material: rubber - Midsole material: one-piece molded cupsole - Upper material: polyester canvas
$149.99
Technical Trail performance Trainer Styling - Highly durable upper fabrics with perforated panels for enhanced ventilation - Low absorbency quick-dry lining - EGM footbed maximizes comfort and power transfer - StickyFoot Grip contact areas provide great connection with pedals - Toe and heel sections deploy StickyFoot Dura in an aggressive tread pattern to provide superb walking grip and durability. - Flex profile balances stiffness and flex for power transfer and control - Traditional laces and additional Velcro strap lock your feet in place - Tongue gaiter help keeps mud and dirt out - Sharkskin fabric lined heel cup helps hold foot in place - Reinforced toe and heel box offer protection from flying trail debris
$149.99
A NO-NONSENSE CLIP SHOE FOR PARK, SHUTTLE AND TRAIL SESSIONS Evolution may happen by natural selection, but sometimes a little nudging helps too. Designed for riders desiring a clip offering with the fit and aesthetic of our popular Hellion flat, we took our lightweight microfiber upper, added a hook and loop strap for extra security and created a new clip-compatible hexagon outsole. The result is our lightest clip, all-mountain shoe. The 42mm wide cleat box with index marking offers a generous amount of adjustability for a precise cleat position, whether you prefer hot laps in the bike park or technical singletrack. Features: - CLIP GRIP rubber outsole - 42mm wide cleat box with index markings for cleat placement and extended cleat pocket runway - RC PowerDrive nylon shank drives power and maintains lateral stiffness - EVA midsole provides support and shock absorption - Dual-density EVA insole provides additional support and cushion - Microfiber synthetic upper is abrasion and weather resistant - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Hook and loop strap for additional foot retention - Elastic lace tuck to keep laces secure - Abrasion-resistant TPU toe and heel with internal toe protection
$149.99
Situated as the top pick from Ride Concepts for daily riding, the Hellion Clip Shoe is the lightest clip-in option in the line. The ankle strap keeps our laces away from our chainrings and adds some extra support, making this shoe suitable for trail spins and bike park days alike. The cleat box is 42mm wide to accommodate a wide range of adjustments for optimal cleat positioning. No-fuss all-mountain shoe for trail, enduro, and downhill riding Clip Grip technology lets you clip into your pedal in a snap Mesh lining wicks moisture and breathes with you Dual-density foam footbed absorbs shocks from heavy impacts PowerDrive nylon shank offers stable support
$142.00
DH DOMINATOR. Developed with input from Giant Factory Off-Road Team pros, this all-new trail and gravity shoe is designed for uncompromising performance on aggressive terrain. Designed with Giant’s Motion Efficiency System, Shuttle blends clip-in pedaling efficiency with the rugged protection and traction you need for nailing new lines or ripping DH runs. Features - Abrasion-resistant, seamless hydrophobic upper provides protection and ventilation - Lace enclosure with mid-cuff trail design and wide Velcro strap for secure fit and stability - ExoWrap design and construction for enhanced fit - Molded nylon ExoBeam midsole plate balances pedaling with flexibility for better stability and traction on rough terrain - Full-coverage rubber tread for stability and traction on platform clip-in pedals - Gravity-specific outsole design improves stability: 108mm (forefoot) and 78mm (heel) - Rubber toe box area protects from obstacles on the trail - EVA midsole and heel areas reduce weight while providing shock-absorbing protection - ExoFlex zone optimizes the natural flex of the toes - Removable single-density ErgoComfort Insoles - Wider range fore and aft cleat position adjustment
$139.99
OUR ICONIC, NO-COMPROMISE ALL–MOUNTAIN FLAT With a dialed fit and proven MAX GRIP rubber outsole for ultimate grip and pedal feel, the award-winning Hellion Elite has established itself as the no-compromise all mountain shoe of choice. We didn't stop there. Our lightest shoe, the Hellion Elite has been upgraded once again with a premium recycled microfiber upper containing at least 30% recycled PET and an anti-bacterial mesh lining, improving breathability and comfort. An anti-abrasion toe and heel offer plenty of protection from trail obstacles and an EVA midsole offers additional support and cushioning. Features: - MAX GRIP rubber outsole - EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Durable recycled microfiber upper (30% PET) is abrasion and weather resistant - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - Abrasion-resistant TPU toe and heel with internal toe protection
$139.99
OUR ICONIC, NO-COMPROMISE ALL–MOUNTAIN FLAT With a dialed fit and proven MAX GRIP rubber outsole for ultimate grip and pedal feel, the award-winning Hellion Elite has established itself as the no-compromise all-mountain shoe of choice. We didn't stop there. Our lightest shoe, the Hellion Elite has been upgraded once again with a premium recycled microfiber upper containing at least 30% recycled PET and an anti-bacterial mesh lining, improving breathability and comfort. An anti-abrasion toe and heel offer plenty of protection from trail obstacles and an EVA midsole offers additional support and cushioning. Features: - MAX GRIP rubber outsole - EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Durable recycled microfiber upper (30% PET) is abrasion and weather resistant - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - Abrasion-resistant TPU toe and heel with internal toe protection
$139.99
Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams
$139.99
Mountain Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider, designed to have just as much performance when hiking as it does when riding. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. Approximate weight: 386.5 grams.
$89.99 - $130.00 $130.00 Up to 31% Off
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.
$129.99
The Tracker fits the need for a cycling/e-bike friendly flat pedal shoe that's light, comfortable and breathable enough for all-day adventures, yet doesn't sacrifice grip or performance when you need it. Built on our new last, placing the foot closer to the pedal and featuring a flat profile for optimal pedal contact, the Tracker has direct lineage to the performance of our more aggressive flat pedal models without any excess bulk. The Tack Rubber outsole engages flat pedal pins with confidence and a dual-layer EVA midsole provides comfort for off-the-bike hikes. A single, tongue mounted BOA L6 dial makes for quick on/off and micro-adjustment for a supportive fit.
$129.99
The Women's Tracker fits the need for a cycling/e-bike friendly flat pedal shoe that's light, comfortable and breathable enough for all-day adventures, yet doesn't sacrifice grip or performance when you need it. Built on our new last, placing the foot closer to the pedal and featuring a flat profile for optimal pedal contact, the Tracker has direct lineage to the performance of our more aggressive flat pedal models without any excess bulk. The Tack Rubber outsole engages flat pedal pins with confidence and a dual-layer EVA midsole provides comfort for off-the-bike hikes. A single, tongue mounted BOA L6 dial makes for quick on/off and micro-adjustment for a supportive fit.
$124.99
High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.
$124.99
High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.
$120.00
ALL TERRAIN, ALL THE TIME. Throw on your Shuttles, grab your bike and go rip some Saturday morning laps on the local singletrack. Wear them to the shop, go hit the dirt jumps after work and then get ready to meet your buddies for a cold one. The all-new Shuttle Flat shoe is designed to be as versatile and ready for anything as you are. Featuring an ultra-durable dual-density rubber cup sole with exclusive GRIPR rubber compound in the pedal contact area and a super-cushy internal EVA midsole, the Shuttle Flat is guaranteed to become your go-to shoe. FEATURES - Long-lasting, dual-density rubber cup sole - Exclusive GRIPR rubber section in the pedal contact area for extra-secure traction - TPU outer film covering with laser perforation for better foot climate and quick drying - Injection-molded TPU toe guard applied with an extra heavy stitch for durable security - Reflective laces with a stretch mesh lace pocket on the tongue top - Weight: 450g (size 45)
$119.99 - $120.00 $119.99 - $120.00 On Sale
The best flat-pedal trail shoes inspire the confidence you need regardless of the terrain or conditions. So, Giro dug in with the world’s most technical rubber experts at Vibram to create the stickiest shoe compound they have ever launched. The all-new Megagrip ISR rubber combines best-in-class vibration-damping with pedal-sticking power. And when you combine that rubber with the Riddance’s full-length optimized EVA midsole, a smart tread design and a supple-yet-durable microfiber upper, you get exceptional performance and confidence—even over the most demanding trails and jumps.
$120.00
FLAT OUT SENDING. Liv Shuttle Flat is poised for performance, with the comfort, grip, and protection you need when sending it over a rock garden or filleting a berm. These surefooted mountain bike shoes perform under pressure and meet the demands of rigorous riding while providing ultimate comfort. Keep your cool as you walk to grab a mid-ride drink before heading up for another lap! FEATURES - GRIPR dual-density rubber in the pedal contact area is highly abrasion-resistant and reliable for pedal contact and walking through technical terrain. - Internal EVA insole for supreme cushioning - High-tech TPU film with laser-perforation for better foot climate and quick drying - Injection TPU toe guard with extra-heavy stitch for durability and protection - Stretch mesh lace pocket on tongue top to pack the excess lace for added safety. - Reflective laces to improve visibility when navigating the streets to the trailhead.
$89.99 - $120.00 $109.99 - $120.00 Up to 18% Off
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)
$89.99 - $119.99 $119.99 - $120.00 Up to 25% Off
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.
$109.99 - $119.99 $109.99 - $120.00 Up to 8% Off
If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.
$119.99
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)
$119.95
All day, flat out. Keep it casual with the Union Canvas Shoes. With their laid-back style and technical features, these tough canvas shoes deliver performance and comfort both on and off the bike. Their low profile, custom-tuned EVA midsole provides an improved grip and feel as you pedal, while the toe cap protects against rock strikes. In terms of combining on-bike power transfer with off-bike comfort, the internal stiffening plate optimizes both for a one-two punch of versatility. Like all shoes in the Union range, these shoes feature an Ultratac™ rubber sole with an engineered tread pattern designed to provide best-in-class grip and durability. Key Features and Specifications: - Off-bike styling, on-bike performance - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes - Front lace-keeper system - Durable canvas upper for on/off bike comfort and styling - Custom hex-shaped lugs engage with flat pedal pins to deliver control on the bike - Low profile custom-tuned EVA midsole for improved pedal grip and feel - Molded internal stiffening plate optimizes power transfer and off-bike comfort - Materials: 50% textile, 25% Eva, 25% rubber - Weight: 373g/13.2 oz Size and Fit: - Shoes have a standard fit that's true to size, take your normal shoe size - Sizing is uniform across all models: Fox Union BOA®, Fox Union, Fox Union Flat and Fox Union Canvas
$49.99 - $119.95 $150.00 Up to 67% Off
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$115.00
TAKE THE LEAP TO CLIPLESS. If you've been wishing for a pair of clipless cycling shoes that provides four-season comfort and simultaneously makes you look fantastic, Regalo is the shoe you've been waiting for. Wide closure straps allow you to quickly change in and out of riding gear, and these shoes stand above the crowd in terms of walkability. FEATURES: - ForceDriveTM nylon outsole gives entry to clipless pedal-level riders optimized stiffness for better power transfer - Streamlined tread keeps things light - Anti-slip studs in front, middle, and rear of outsole provide enhanced walking ability - AIRSTREAMTM 4-vent Cooling System produce an airflow effect that works in conjunction with the honeycomb air mesh fiber on the upper, resulting in a complete cooling system - Last optimizes comfort and fit during on-road cycling - Three large Velcro straps provide easy, infinite adjustment - A two- or three-bolt cleat pattern fits any pedal style - Light TransTextura PlusTM anti-odor breathable sockliner - Air mesh tongue - Durable and breathable synthetic upper material with soft mesh collar and lining - SPD and SPD SL Cleat compatibility
Page 1 of 2 Next page