Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shoes

$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156
$449.99 - $450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$424.99
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$424.99
When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$399.00
KEY PERFORMANCE FACTORS SUPERIOR POWER TRANSFER An all-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber for superior toe-heel stiffness. The unique design significantly boosts power transfer while allowing enough torsional flex for natural foot movement. This helps minimize lower leg strain during the pedal stroke with zero watts wasted. PERSONALIZED FIT Most cycling shoe enclosures press the foot down toward the sole. The Surge Pro’s redesigned ExoWrap system draws the foot up into the shoe, using its unique wrap-around design and new micro-adjust Li2 Boa® reels. The result is a 360-degree foot closure that gives you an ultra-comfortable and personalized fit. COOL COMFORT A new polyurethane coated mesh upper with laser cut micro-perforations delivers maximum ventilation combined with long-lasting durability. The seams are welded rather than sewn, which helps minimize weight and gives these road shoes a sleek profile with a supple feel. - All-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber lay-up construction for superior toe-heel stiffness - An all-new 360º wrap-around upper with high frequency welded seams and laser cut micro-perforations for optimal ventilation and a balanced foot climate - All-new internal ExoWrap structure for an ultra-comfortable, 360-degree foot enclosure and a customizable fit - All-new exclusive performance last offers all-day comfort and increased fit options - All new micro-adjust Li2 Boa reels give a super secure and comfortable fit, Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate
$399.00 $399.00 On Sale
The new Macha Pro helps you get the most out of every pedal stroke whether you’re out on a training ride or in a mid-race sprint. Anchored by the power of technology, the Macha Pro puts the Motion Efficiency System to work for you. These performance-level racing shoes are lightweight and efficient, and the stylish design comes in two colorways. FEATURES - 100% long-fiber carbon ExoBeam plate with all-new dual beam design, offers secure mid-foot contact for better power transmission - ExoBeam technology reduces strain on the knee and ankle joints - All-new 360º ultra-lightweight, wrap-around upper with high frequency welded seams offers optimal support - All-new internal, direct pull ExoWrap structure design with all-new dedicated Boa Li2 dial produces a 360° foot enclosure for customizable arch fit and support - Laser cut micro-perforations in the upper for improved ventilation, cycling-specific performance last enhances overall performance - SharkSkin heel lining, removable sockliner with tunable arch support and TransTextura Plus layer
$350.00
The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).
$299.99 - $349.99 $299.99 - $349.99 Up to 8% Off
Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.
$249.99 - $349.99 $299.99 - $349.99 Up to 29% Off
Upper: Microfibre microtech Sole: Carbon composite 20 sole Technology: - Soft instep 4 - Tecno 3 system - Sidi heel cup - Replaceable heel pad
$299.99 - $324.99 $324.99 Up to 8% Off
Ride further, whatever the terrain, whatever the bike, whatever the destination. The Sidi Eagle 10 is the best shoe for any day on the dirt, whatever your riding style. The Microtech upper, the first microfiber introduced in cycling shoes years ago by Sidi, is the most comfortable Sidi has ever offered, while the sole is designed to ensure the ideal combination of performance and comfort both on and off the bike. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep, ensuring an ideal fit -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The all new proprietary SIDI Wire monofilament is completely non-binding for intuitive and effortless on-the-fly adjustments -The integrated heel cup, with a new light weight design is reinforced to avoid deformation during the most grueling of rides -The reflective inserts on the heel improve safety on the road, helping to signal the presence of the cyclist in conditions of poor visibility -The shape of the tread has been specifically designed for mountain biking, allowing improved grip, superior mud dispersion and great stability -The toe inserts are easily replaceable and offer the ability to mount crampons for particularly muddy rides -The Sidi MTB SR17 sole represents an ideal balance of stiffness for efficient power transfer and flexibility and comfort for walking
$179.99 - $259.99 $239.99 - $259.99 Up to 25% Off
- Upper: Politex suede effect, mesh, upper drilled on the inside. The "Politex” material is constructed of several overlapping layers with different physical mechanical properties. The compacted PVC is then coupled to two fabrics (knitted fabric + felt) that is then film dyed for long-lasting color retention. "Politex” offers strong resistance to ripping, laceration, stretching and fading. "Politex” is made in strict compliance with European regulations and is a totally "green” product. - Has been specifically studied for this specialty, may be fitted with two toe spikes on the front for traction in difficult and muddy conditions. The toe spikes are sold separately. - Polyurethane shock absorber on the external area with inner padding. - Abrasion-resistant material on the toe. - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. - Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on the-fly adjustments. - Like most Sidi small parts, the Techno-3 System is serviceable and replaceable.
$250.00
Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)
$249.95
The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes
$179.99 - $239.99 $239.99 Up to 25% Off
- Upper: Politex suede effect, mesh, upper drilled on the inside. The "Politex” material is constructed of several overlapping layers with different physical mechanical properties. The compacted PVC is then coupled to two fabrics (knitted fabric + felt) that is then film dyed for long-lasting color retention. "Politex” offers strong resistance to ripping, laceration, stretching and fading. "Politex” is made in strict compliance with European regulations and is a totally "green” product. - Has been specifically studied for this specialty, may be fitted with two toe spikes on the front for traction in difficult and muddy conditions. The toe spikes are sold separately. - Polyurethane shock absorber on the external area with inner padding. - Abrasion-resistant material on the toe. - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. - Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on the-fly adjustments. - Like most Sidi small parts, the Techno-3 System is serviceable and replaceable.
$224.99 - $230.00 $224.99 - $230.00 Up to 2% Off
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)
$225.00
Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding
$224.99 $299.99 25% Off
Sidi's Dominator line has long been one of the more popular MTB kicks you'll find on the mountain, particularly in disciplines that ask for unwavering stiffness and power, and this year the brand is back to please again with its tenth iteration in the Dominator 10 Cycling Shoe. While the last has remained the same to keep fit true, the Dominator 10 features a host of new technology, including a dual Tecno 3 Boa system for minute adjustments to fit, and all-new Soft Instep 4 closure that reduces pressure to the instep, preventing foot-numbing pressure while you ride. But thankfully not everything has changed — Sidi stays true to its roots with Microtech Microfibra uppers that are both supple and supportive, without packing in extra weight. These incredibly fine fibers act like a natural leather skin, but have advantages of increased strength, soft texture, and light weight. Being water-repellent, quick-drying, breathable, and permeable to water vapor, it's an ideal material for shoe uppers, and easier to clean than leather. Additionally, this material is resistant to stretching and deterioration from atmospheric agents. And to keep your feet from getting too warm, mesh inserts were added throughout the uppers. To cap it all off, the manufacturing process is environmentally friendly, using only water-based products instead of solvents. Sidi also continues using its MTB RS17 sole, which they report is lighter and better performing, constructed of a stiff nylon composite that efficiently puts power to the pedals. The tread inserts provide grip on a variety of surfaces and also facilitate mud dispersion. If you need some extra traction in particularly sloppy conditions, the sole is compatible with toe spikes. For those times when you miss a clip-in, the central insert works as a traction pad to help prevent slipping a pedal. Perhaps the most exciting update to the sole is that the toe insert is now replaceable via screws. Considering this area is subjected to more wear, especially when walking, this is a simple and inexpensive way to prolong the life of these already durable shoes. Sidi's coveted MTB kicks get a makeover in their newest iteration Microtech microfiber uppers are light, durable, and water-resistant New Soft Instep 4 closure system reduces foot-numbing pressure Two Tecno 3 dials enable micro-adjustments for dialing a flawless fit Secure your foot in place with help from reinforced heel cup Don't waste your efforts on flex with MTB RS17 nylon composite sole Aggressive lugs improve grip for off-bike efforts
$209.99 $324.99 35% Off
On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, “What shoes are those?” - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.
$200.00
The original Impact is the most popular and versatile shoe in downhill mountain biking history. With a Stealth S1 rubber outsole, the Impact is burly and durable without sacrificing stickiness or pedal contact. A slingshot heel for a secure fit, compression-molded PU midsole for extra support, and a stitched and reinforced toe cap for protection from the hazards of the trail make the Impact one of the most comfortable and protective shoes available. Its leather upper contains a mesh tongue and side panels for increased breathability making it an ideal shoe for any environment. - Outsole Material: Rubber - Midsole Material: Compression-Molded PU - Upper Material: Leather
$179.99 - $180.00
GRAVEL SHOES WITH OPTIMALLY BALANCED STIFFNESS AND WALKABILITY. FEATURES: - Carbon-reinforced sole provides race-level rigidity for enduring pedaling performance on day-long rides. - Wide outsole pattern with TPU lugs for optimal on- and off-the-bike comfort and performance. - Lightweight gravel-race-inspired outsole. - Surround wrapping upper pattern balances holding power and comfort. - BOA L6K dial allows quick and precise micro-adjustment. - System engineered with SPD pedals for maximum pedaling efficiency and stability.
$179.99 - $180.00
$180.00
Ready to tackle dust, mud, and mixed terrain, the RX600 Women's boasts powerful pedaling performance and confidence inspiring grip in a gravel shoe thoughtfully engineered for bikepacking and adventuring. - Versatile Gravel Shoe: the RX600W is a women's SPD gravel shoe with optimally balanced stiffness and walkability for off-road exploring - Efficient Pedal Performance: stiff carbon reinforced outsole transfers your efforts directly to the pedal - Bikepacking Friendly: wider outsole offers extra stability when walking or pushing your bike - Tailored Fit: L6 BOA dial closure system cinches in seconds for a secure fit every ride - Women's Sizing: designed with a women's specific last for a natural, comfortable fit. - Cleats sold separately
$180.00
The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)
$180.00
If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)
$159.99 - $170.00 $159.99 - $170.00 Up to 6% Off
The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)
$126.99 - $169.99 $159.99 - $170.00 Up to 21% Off
Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)
Page 1 of 4 Next page