Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$3.68
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
$28.00
Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement.
- HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$14.00
- Mega Exo right hand threaded (RH) hollow carbon screws with a self-extracting cap
- Designed to fit FSA MegaExo Cranks only
- Includes bolt, self-extracting cap, and washers
$115.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 15mm
- Outer Diameter: 28mm
- Width: 7mm
$28.99
Featuring a universal design that allows the switch from a bolt to a QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it.
- Collar can be converted to QR
- Machined from billet 2014 T6 aluminum
- Bolt-compatible universal collars
- Available in Black, Silver, Red, Blue, Purple, and Orange
- Weight from 20g
$42.99 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$8.99 - $9.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$11.99
- AL6061-T6 alloy quick-release seatpost clamp
- Stainless steel bushing ensures smooth lever action
- Adjustment knob allows for on-the-fly fine-tuning
- Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts
- 28.6mm for 25.4mm seatpost and steel frame
- 29.8mm for 27.2mm seatpost and chromoly frame
- 31.8mm for 27.2mm seatpost and aluminum frame
- 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame
- 16mm height
$19.99 - $21.99
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$17.99
Adapters to convert your flat mount fork to post mount calipers
- FF-1 front 140mm rotor
- FF-2 front 160mm rotor
- FR-1 rear 140mm rotor
- FR-2 rear 160mm rotor
- Each includes two bolts
$28.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$34.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$39.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$82.45
Desgined to increase the stiffness of the EPS front derailleur on frames with flexible braze-on mounts, especially frames with carbon fiber mounts.
- Required for use on carbon frames with carbon front derailluer braze on mounts
$18.00
ABI Headset Bearing for new builds or replacements.
$4.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts.
- Specific to RockShox Reverb post
$78.65
Campagnolo Rear Recessed Pivot Bolt Assembly Caliper Brake Part
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$34.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$499.75
Upgrade your Ritchey WCS 4-Axis stem with these lightweight titanium bolts.
- 6pcs M5 / p0.8mm /18mm length
- Fits WCS 4-Axis stems
$499.00
Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a technological advance for the cycling industry.
Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings start at 40%, and the CeramicSpeed Bearings inside offers a 3-5 times longer lifespan compared to standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts.
This 17/17-tooth OSPW system for SRAM eTap derailleurs is compatible with up to a 32 tooth cassette and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS.
If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs.
The typical overall power savings of the OSPW System for OSPW System for SRAM eTap is 40%-60% over a stock setup.
The oversized pulley wheels have lifespan that is 3-5 times longer than the commonly used standard pulleys on the market.
In The Box:
- Oversized Pulley Wheel System
- CeramicSpeed Bearing Oil in 15ml dropper bottle
- Sticker Sheet
$599.00 - $699.00
This is an updated version of the Oversized Pulley Wheel System for Shimano 9100/9150 and 8000 SS/8050 SS. This new design has an integrated stop tower for easier mounting.
The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world, providing energy savings starting at 2.4 watts compared to standard Shimano systems.
The OSPW System for Shimano 9100/9150 and 8000 SS/8050 SS is an industry-leading product, chosen by many of the world's leading cycling teams and professional triathletes.
It features a 13-tooth upper pulley wheel and a 19-tooth lower to provide absolute optimization of the rear derailleur, and these oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings: your choice.
The Shimano 9100/8000 OSPW system is compatible up to a 32 tooth cassette for both Dura Ace & Ultegra derailleurs
The typical overall power savings of the OSPW System for Shimano 9100/9150/8000 is 30%-60% over a stock setup.
The oversized pulley wheels have lifespan that is 3-5 times longer than the commonly used standard pulleys on the market.
Please note: The OSPW System for 9100/9150 and 8000 SS/8050 SS is NOT compatible with Ultegra 8000-GS or 8050-GS (medium cage) derailleurs, nor with the clutch-equipped Ultegra RD RX800 & RX805. Choose CeramicSpeed's OSPW X for Shimano RX800/805 for a compatible RX800 & RX805 version. For a compatible upgrade for Ultegra 8000-GS or 8050-GS choose their Pulley Wheels for Shimano, 11s NW.
In The Box:
- A complete 13-tooth/19-tooth OSPW System
- CeramicSpeed Bearing Oil in 15ml dropper bottle
$17.99
Flat mount front adapter for both 140mm or 160mm rotors. All mounting hardware included in package.
$19.99
$20.00
On Sale
SRAM's Headset Spacer Set gives you what you need for setting handlebars to the correct height for a custom fit. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish SRAM logos. You get two 5mm spacers and one 10mm and 15mm one.